Standard PCB service refers to full feature printed circuit board manufacturing service. With years' experience in PCB fabrication, we have handled hundreds of thousands of PCB projects, and covered almost all kinds of substrate materials including FR4, Aluminum, Rogers, etc. This page only touches standard FR4 based PCB. For PCBs with special technical substrate, please refer to corresponding webpages for information.

Unlike Prototype PCB service, our Standard PCB service has tighter production tolerances. The following two articles will give you enough information about those two services on their introductions and differences:

When to use PCB Prototype Service and when to switch to Standard PCB Service

PCB Prototype & Standard PCB Manufacturing Services Comparison

PCB Prototype Service vs. PCB Standard Production

Pcbmain offers both prototype service and standard PCB production. While you will usually eventually use both services, there is an appropriate time for each. The difference is simple. With the prototype service, we take your design and quickly build a small batch of boards using basic materials, which we then ship to you in just a few days. The idea is just to give you a sense of whether your design works or not and worth it to do a full production run. You can test the boards to locate any design flaws before you make a big investment in PCB fabrication based on that design.

In standard PCB production, we are actually making the boards you will use in your applications. This will take a bit longer since we may be using different materials and more complex fabrication processes (e.g. multi-layer designs), but it will usually still be as fast or faster than other PCB fabrication services. You will normally make a larger run of these, since you will actually be using these boards for your market applications.

If you are working from an existing design you have used before, you may want to jump directly to the standard PCB production service. Since design flaws are much less likely, it could save you some time to get the standard boards you need right away. If you are testing a new design, we highly recommend you engage our PCB prototype service. You will lose little time and be able to verify that your design works before standard production, which could save you considerable time and money if you do uncover design flaws.

Get Your Next PCB Design off the Ground with PCB Prototype Service

When you are just starting the development of a new product our rapid PCB prototyping service can help you get your new design from concept to production in record time. When developing a new product, quickly iterating through new versions of your design is of the utmost importance. Rapidly testing and correcting designs is what will allow you to hone in on a finished product as quickly as possible. Additionally, it is also well known that making large engineering changes to a design is best done in the early phases of product development. PCB Prototyping service can allow you to locate just such design change requirements early in the development cycle. Spot design errors in low quantity prototype production runs of your PCB board before ramping up production volume. Hence, it allows you to refine your next design quickly at an affordable cost.

As the saying goes, "time is money" and waiting on long lead time PCBs can doom a project to failure. That is why we offer quick-turn PCB prototype service, which builds your proto boards in as few as 2 working days. Additionally, this service is well suited to low volume production runs with a minimum order quantity of only five boards.

Although our prototype PCBs do not have as high of production tolerances as standard circuit boards, they allow you to get a very good idea of how well your final production version work. Having an accurate view of how your final design will turn out is of great importance to ensuring that your design is successful. Our prototyping service provides you with a nearly identical product to that of a high volume standard production run, albeit at slightly lower manufacturing tolerances. Despite the lower production tolerances, we support track widths down to 4mils and track spacing down to 4mils, 5mils minimum annular rings and minimum drill sizes down to 0.2mm (8mils). Additionally, we can manufacture PCB up to 16 layers in layer count and 500x500 mm in size, covering most PCB applications. Reviewing these capabilities, it is apparent that our prototyping service will allow you to test and verify demanding tight tolerance designs at a lower cost, with shorter turnaround times than what you would encounter with standard PCB services.

When developing surface mount based solutions, it's also of great utility to order solder stencils for prototype assembly purposes. You need to test your circuit design and make sure it is good for huge production.

PCB Prototype Advantages:

  • Opportunity to do a small test run of your PCB design
  • Fast turnaround on your order
  • Identify any design flaws fast
  • You can change the design without having wasted an entire standard production run

PCB Prototype Disadvantages:

  • The boards’ tolerances are not as high as standard circuit boards
  • You will need to wait until you receive and test the prototype boards before formally ordering your standard production run Limited board materials
  • Limited number of layers for your boards

 

It is recommended to use Standard PCB service when your design is ready to transform from prototype phase to production phase. We can manufacture up to 10 million pieces high quality PCBs with very competitive prices. To endow your project with expected function and more possibilities, we offer advanced features for Standard PCB services. Comprehensive capabilities can be found in the following table:

 

Feature Capability
Quality Grade Standard IPC 2
Number of Layers 1 - 32layers
Order Quantity 1pc - 10,000,000 pcs
Build Time 2days - 5weeks (Expedited Service)
Material FR-4 Standard Tg 150°C, FR4-High Tg 170°C, FR4-High-Tg 180°C, FR4-Halogen-free, FR4-Halogen-free & High-Tg
Board Size Min 6*6mm | Max 600*700mm
Board size tolerance ±0.1mm - ±0.3mm
Board Thickness 0.4mm - 3.2mm
Board Thickness Tolerance ±0.1mm - ±10%
Copper Weight 0.5oz - 6.0oz
Inner Layer Copper Weight 0.5oz - 2.0oz
Copper Thickness Tolerance +0μm +20μm
Min Tracing/Spacing 3mil/3mil
Solder Mask Sides As per the file
Solder Mask Color Green, White, Blue, Black, Red, Yellow
Silkscreen Sides As per the file
Silkscreen Color White, Blue, Black, Red, Yellow
Surface Finish HASL - Hot Air Solder Leveling
Lead Free HASL - RoHS
ENIG - Electroless Nickle/Immersion Gold - RoHS
ENEPIG - Electroless Nickel Electroless Palladium Immersion Gold - RoHS
Immersion Silver - RoHS
Immersion Tin - RoHS
OSP -Organic Solderability Preservatives - RoHS
Min Annular Ring 3mil
Min Drilling Hole Diameter 6mil, 4mil-laser drill
Min Width of Cutout (NPTH) 0.8mm
NPTH Hole Size Tolerance ±.002" (±0.05mm)
Min Width of Slot Hole (PTH) 0.6mm
PTH Hole Size Tolerance ±.003" (±0.08mm) - ±.006" (±0.15mm)
Surface/Hole Plating Thickness 20μm - 30μm
SM Tolerance (LPI) .003" (0.075mm)
Aspect Ratio 1.10 (hole size: board thickness)
Test 10V - 250V, flying probe or testing fixture
Impedance tolerance ±5% - ±10%
SMD Pitch 0.2mm(8mil)
BGA Pitch 0.2mm(8mil)
Chamfer of Gold Fingers 20, 30, 45, 60
Other Techniques Gold fingers
Blind and Buried Holes
peelable solder mask
Edge plating
Carbon Mask
Kapton tape
Countersink/counterbore hole
Half-cut/Castellated hole
Press fit hole
Via tented/covered with resin
Via plugged/filled with resin
Via in pad
Electrical Test

How to Get Quotation of Standard PCBs?

Free PCB quotation is just a click away. Click below button to enter our PCB Price Calculator, fill out your custom PCB spec, and rough PCB price will show up in the right column automatically (shipping price will be given on order confirmation page).

Standard PCB Instant Quote